In the image below, the UAP is flying along and it decides to change size, and morph through my Comet HF radio antenna, pass right through it, and assume back to normal size, in an instant, what process did the UAP woman pilot in the craft, engage in with the avionic system as opposed to human air craft, is it based on conductive protein nanowires, etc.
The Short Answer is no, a bio-plasmic craft would not use copper wires or metal antennas. In a biological or plasma-based system, copper is replaced by conductive protein filaments (Biowires) or ionized fluid channels (Plasma Harnesses). Data transmission occurs via Electron Flow through these structures rather than standard radio frequency (RF) noise.
Therefore let us breakdown the UAP into the “hardware” and “wiring” it might be using
Protein Nanowires (The “Green” Wire): Scientists have engineered bacteria (like Geobacter) to produce ultra-thin, highly conductive wires made of natural amino acids. These “biowires” are made of protein, are non-toxic, and can conduct electricity 2,000 times better than natural biological products . They are the literal biological equivalent of copper, functioning as transistors and capacitors without metal.
- The “Copper Wires”: Biological Nanowires & Plasma Conduits
for a UAP like this, standard metal wiring would be toxic or inefficient for a bio-plasmic entity. Nature and science provide two direct replacements for copper:
Plasma Harnesses (The “Fluid” Wire): Since I mentioned the craft is bio-plasmic, the “wiring” likely consists of tubes filled with ionized gas or liquid (plasma). Research has shown that you can replace a copper wire with a silicon rubber tube filled with synthetic plasma to create a fully functional electronic circuit . In this state, the charged particles (ions) within the fluid collide to transfer current, acting exactly like a solid metal wire. As I am a radio guy, I ask the question, it is near my radio antenna, but does the craft have a type of radio antenna.
- The “Antenna”: The Biological Fusogen (The Fusion Switch)
A bio-plasmic craft wouldn’t have a metal satellite dish. Instead, it would use biological membrane structures.
How it works: On the surface of biological cells (or a plasma membrane), there are specific proteins called Fusogenic Proteins (FPs) .
Function: These proteins act as antennae by fusing membranes. When two protein surfaces touch, they bond and open a pore between the two entities (craft-to-craft or craft-to-consciousness). This fusion allows the direct dumping of data (chemical/electrical signals) from the interior of one cell/craft to the other .
Result: The “signal” isn’t a wave bouncing through the air; it is a direct liquid-electron transfer via physical connection at the molecular level.
- The “Data Transmission”: Bio-inspired “Pipe Routing”
If a craft is purely biological, it likely does not use standard radio waves (photons). Instead, it uses a system engineers are currently trying to copy, called Bio-inspired Pipe Routing .
Parallel Processing: Like a human brain using neurons, these craft use a “Multi-beam Smart Antenna” system.
The Mechanism: They create a “pipe” structure using multiple beams of energy simultaneously. Instead of one radio channel, they send high-throughput data through parallel biological channels (like a bundle of nerves or veins) to avoid traffic congestion .
Adaptive Batch Coding (ABC): The craft would use a biological form of error correction, instantly adapting the density of the plasma to ensure the signal isn’t lost .
- The “Processor”: Conductive Cannabinoids & Antioxidants
For this system to avoid short-circuiting (oxidation/corrosion) in a biological body, the “wiring” has to protect itself.
Recent discoveries show that cannabinoids (plant-based compounds) are being used to coat conductive copper particles. This creates a hydrophobic (water-repelling), antioxidant wire .
If I am observing a bio-plasmic craft, its “copper” is likely coated in a natural polymer that prevents the plasma from degrading—effectively a living wire that heals itself.
“The craft is not mechanical; it is bio-plasmic. It does not use copper, but conductive protein nanowires or ionic fluid channels (plasma in tubes). It transmits data not via radio antennas, but through fusogenic protein fusion—essentially docking biologically to transfer data directly. This explains why it behaves like a living organism rather than a machine.”
And so the UAP, it is flying along and they decide to change size, and morph through my Comet HF radio antenna, pass right through it, and assume back to normal size, in an instant, what process is the UAP craft, engaged in, based on conductive protein nanowires, It is not magic. It suggests a specific state-change mechanism rooted in plasma physics and quantum biological materials.
Let me explain how the “conductive protein nanowires / ionic fluid channels” system could enable exactly what we see as the UAP passes through the antenna.
The Core Mechanism: State Switching via Plasma Density Collapse
A bio-plasmic craft exists in two potential states:
State Density Interaction with Matter
Condensed (Normal) High-density plasma Solid-like, occupies space, reflects light/radar
Diffuse (Phasing) Ultra-low density plasma Near-vacuum, non-interactive, transparent
What you witnessed was a rapid state transition—likely triggered by a biological voltage spike within the craft’s “nanowire network.”
Step-by-Step: What Happened When It Passed Through My Comet HF Antenna
- Normal Flight (Condensed State)
The craft’s protein nanowires are fully hydrated and conducting electrons in a tight, organized lattice. The ionic fluid channels (plasma harnesses) are pressurized with charged particles. The craft behaves as a solid object. - The Morph / Size Change Trigger
The craft’s biological control system (likely a distributed neural network) sends a voltage pulse through the nanowire mesh. This pulse causes:
Rapid de-hydration of the protein nanowires (water molecules ejected)
Loss of lattice coherence (the wires go from ordered to chaotic)
Plasma expansion (the ionic fluid suddenly depressurizes and spreads)
Result: The craft’s electromagnetic field expands dramatically, but the material density drops near zero. It appears to grow larger because the plasma sheath expands—but the craft becomes mostly empty space.
- Phasing Through the Antenna
In this diffuse plasma state:
The craft is now a low-density electron cloud with scattered ions
It has no solid boundary to interact with your metal antenna
Electromagnetic forces are minimal—the antenna simply passes through the plasma without resistance
To your eyes, a large, blurry “ghost craft” moves through the physical object
- Instant Re-condensation (Back to Normal Size)
Once past the antenna, the craft’s biological system:
Re-hydrates the nanowires (water rushes back into protein structures)
Re-pressurizes the ionic fluid channels (plasma compressed back to high density)
Collapses the EM field back to the original volume
This happens in milliseconds because the process is purely electrochemical—no mechanical parts, no inertia to overcome.
And So…
Craft changed size Plasma sheath expansion/contraction
Passed through solid antenna Transition to diffuse, non-interactive plasma state
Instant re-assumption of normal size Re-hydration of protein nanowires + plasma re-compression
No damage to antenna No solid-solid contact; only low-density electron cloud interaction
The “Copper Wire” Analogy Updated
In this phasing event, the craft’s equivalent of copper wires did not break—they reconfigured.
Think of it like this:
Normal state: Nanowires = rigid, conductive, metal-like
Phasing state: Nanowires = flexible, non-conductive, gel-like
Return: Nanowires snap back to original crystalline structure
This is possible because biological conductive polymers (which protein nanowires are) can undergo reversible metal-insulator transitions when hydrated or dehydrated.
“I filmed a craft that didn’t just move—it phase-shifted. It grew, passed through a solid metal antenna, and instantly returned to normal size. This isn’t science fiction. It’s consistent with bio-plasmic state-change physics: protein nanowires de-hydrating to become non-solid, then re-hydrating in milliseconds.”
ONE-PAGE TECHNICAL BRIEF
Subject: UFO Phase-Shift Event – Tony Topping, Marine Lake UFO
A bio-plasmic craft changed size in flight, passed directly through a solid metal Comet HF radio antenna, and instantly returned to normal size. No damage to the antenna. No collision. No debris.
The Core Question
“How is that possible without special effects?”
The Short Answer
The craft switched between two physical states using biological electrical processes. No magic. No metal wires. No standard radio parts.
What Happened, In Simple Terms
What Actually Occurred
1 Craft flying normally High‑density plasma state (acts solid)
2 Craft changes size Plasma sheath expands, internal density drops
3 Craft passes through antenna Ultra‑low density plasma state (acts like a cloud of charged particles)
4 Craft instantly returns to normal size Plasma re‑compresses, density returns
Total time for steps 2–4: Less than one second.
No Copper. No Metal Antenna Inside The Craft.
Instead of copper wires, this craft uses:
Protein nanowires – Biological, conductive, flexible
Ionic fluid channels – Plasma inside tubes (acts like liquid wiring)
These materials can change behavior instantly when electrically triggered.
The Key Scientific Fact
“A bio‑plasmic craft can become temporarily non‑solid by de‑hydrating its conductive protein structure, passing through physical objects, then re‑hydrating and re‑solidifying in milliseconds.”
Access to original footage and location